Important Safety Information; Safety Notes; Personnel; Intended Use - SystemAir AxZent Betriebsanleitung

3

Important safety information

3.1

Safety notes

Designers, installers and operators are responsible for the proper assembly and intended use.
»
Only use the Multibox in a proper condition.
»
Provide generally prescribed electrical and mechanical protective devices.
»
Secure the place of installation and the premises against unauthorised access during installation, commissioning, maintenance and
monitoring.
»
Observe work safety regulations.
»
Safety components must not be bypassed or put out of function.
»
Ensure that all warning signs on the Multibox are complete and legible.
»
Regularly instruct personnel about safety-conscious behaviour.
NOTE
We have carried out a risk assessment for the Multiboxes. However, it can only apply to the Multibox itself. After
installing the Multibox, we recommend carrying out a risk assessment for the whole system. This guarantees that the
system will not present a risk.
3.2

Personnel

3.2.1 Installation personnel
•
Installation may only be carried out by trained, qualifi ed personnel.
3.2.2 Work on the electrical equipment
•
Work on the electrical equipment of the fan may only be carried out by a qualifi ed electrician or person with electrical training. This
person must know the relevant safety rules to recognise and avoid potential risks.
3.2.3 Personnel for operation, use, maintenance and cleaning
•
Operation, use, maintenance and cleaning may only be performed by trained and authorized personnel. The operating personnel
must have the appropriate knowledge required to operate the Multibox. They must be able to act correctly and appropriately in the
event of a malfunction or emergency.
3.3

Intended use

The Multibox (MUB) is intended for installation in ventilation systems. It can be installed either in a duct system or as free-intake fans
using inlet nozzles and an intake-side protective grille. A free intake/output device via a guard grille is possible following consideration
in the design.
•
The Multibox is suitable for conveying clean air, air with a low dust and grease content, media up to a max. density of 1.3 kg/m³ and
permissible humidity of max. 95 %.
•
The maximum permissible operating data on the name plate apply for an air density of 1.2 kg/m³ (sea level) and a max. air humidity
of 80 %.
32
Important safety information