Uninstalling/Disassembly; Safety Information; Disconnecting; Disassembly - SystemAir AxZent Betriebsanleitung

13

Uninstalling/disassembly

13.1

Safety information

Danger from electrical voltage!
»
The device may only be switched off and uninstalled by a trained electrician or trained and instructed qualified personnel!
»
Observe the 5 rules of electrical safety (see section 2.5)!
»
Switch the fan off.
Danger of impact from falling fan or parts of the fan!
»
When selecting the hoisting equipment and fi tting material, observe the weight, tendency to vibrate and
shear forces (weight information on the name plate).
»
Wear a helmet and protective goggles.
Danger from impact and cuts!
»
Wear protective gloves when dismounting!
»
Disassemble carefully.
13.2

Disconnecting

Carefully disconnect all the electrical lines.

Disconnect the fan from the supply connections.

13.3

Disassembly

Carefully remove the fastening material.

Lift the fan using appropriate hoisting equipment via the provided lifting eyes.

Place the fan on an appropriate pallet.

14

Disposal

Both the appliance and the transport packaging predominantly comprise recyclable raw materials.
14.1

Disposal of the fan

14.1.1 Safety information
Danger from electrical voltage!
»
The device may only be switched off and uninstalled by a trained electrician or trained and instructed qualified personnel!
»
Observe the 5 rules of electrical safety (see section 2.5)!
»
Switch the fan off.
14.1.2 Final disassembly and disposal
Disconnect the fan and disassemble as described in chapter 12.

Disconnect the fan from the supply connections.

Disassemble the fan into its components.

Separate the parts according to:

–
reusable material,
–
material groups to be disposed of (metal, plastics, electrical parts, etc.).
Ensure material is recycled. Observe national regulations.

14.2

Disposal of packaging

Ensure material is recycled. Observe national regulations.

54
Uninstalling/disassembly