Task 5: Performing The Initial Setup - Promise Technology VTrak E-Class Series Kurzanleitung

VTrak Quick Start Guide

Task 5: Performing the Initial Setup

The VTrak's default network settings are DHCP enabled. The Bonjour service on
the VTrak enables your Safari browser to find the VTrak on the network and
establish a connection automatically.
Establishing a Connection with VTrak
To establish an Ethernet connection between your Mac and the VTrak:
1. Be sure the VTrak is connected to the network and powered on.
See "Task 3: Making Management and Data Connections" on page 8 and
"Task 4: Powering On the System" on page 16.
2. On your Mac Desktop, launch Safari.
3. In Safari, click the Show all bookmarks icon.
See Figure 14.
Figure 14 Show all bookmarks icon
Click the Show all
bookmarks icon.
The Collections list appears. See Figure 15 on the next page.
4. Under the Collections list, click the Bonjour icon.
The Bonjour links appear in the Bookmarks list. Each VTrak on your network
is listed by its World Wide Node Name (WWNN).
18