Denon DVD-3800 Bedienungsanleitung Seite 18

3
© When "DELAY TIME" is selected
With 51-channel surround sound, ideally the distance
between the listening postion and all the speakeEs
aside from the subwoofeE should be the same The
delay time setting can be used to make the sound
from the d fferent speakers reach the listening
position at the same time
Use the • and Y cursor buttons to select the sett ng
item, then press the ENTER button
• When "DISTANCE" is selected:
METERS (when the "4 cursor button is pressed):
The unit of distance is set to meters ("m")
FEET (when the _ cursor button s pressed):
The unit of distance is set to feet ("ft")
• Whe_ "FRONT Lch", "FRONT Rch", "CENTER",
"SURROUND Lch", "SURROUND Rch",
"SUBWOOFER" is selected:
Use the "4 and I_ cursor buttons to set the
d stance from the listening position to the different
speakers
The distance can be set within the range of 0 to
60 feet (18 meters)
The maximum difference n speaker distance for
which adjustment is possible is 15 feet (45
meters)
• When "DEFAULT" is selected:
When "DEFAULT" is selected and the ENTER
button is pressed, all the items are restored to their
factory defaul[ settings
_-- When digital co_nections are made with an AV
amplifier, make the speaker sett ngs on the AV
amplifier
For DVD audio discs, the disc's settings are given
priority, so the sound may not be produced as set
with the above speaker mode setting
• -- Press the RETURN button to return to the
"SPEAKER SETUP" menu
Remote contro; ur_ Remo_e _r_tlo! unit
Remote control _n_t
3
"/2 When "DIGITAL OUT" is selected:
NORMAL (Factory default)
When playing DVDs recorded in Dolby Digital or DTS,
bitstream signals are output from the digital audio output
terminals¸ When playing DVDs recorded in linear PCM or
packed PCM, linear PCM signals are output¸
Select "NORMAL" when making digital connections to an
AV amplifier with buik-in Dolby Digital and DTS decoder¸
PCM
When playing Dolby Digital/DTS bitstream signals or
DVDs recorded in linear PCM or packed PCM, the signals
are converted into 46 kHz/16-bit PCM (2-channell signals
and output from the digital outputs¸ When playing DVDs
recorded in PCM, linear PCM signals are output¸
_" When "LPCM {441 kHz / 48 kHz}
rr
is selected:
OFF (Factory default}
When playing linear PCM or packed PCM DVDs that are not
copyr ght protected, for 2-channel PCM audo signals _p to
96 kHz, linear PCM s gna}s are output as such wthout being
converted from the digital outputs (1762 kHz and 192 kHz
signals are converted to 882 kHz a_d 96 kHz, respectively)
PCM sig_als of 48 kHz/16 bits and lower are output, regardless
of whether they are copyright-protected or _ot
For DVDs co_tain ng mu t-cha_me PCM sg_als, the d gital
sig_als are down-mixed for o_tput into two channels, front left
and right (Only the front left and right cha_ne}s are output for
sources for which down-mixing is proh bited )
When playing copyr ght-protected linear PCM or packed
PCM DVDSr in consideration of copyrights, no digtal
signals are output for sources exceeding 48 kHz/16 bits
When playing such sources, either set to "ON" or make
analog connections (See page 9)
ON
Linear PCM and packed PCM signals are converted to 441
kHz or 48 kHz and output (The PCM digtal audio output
sgnals are co,wetted to 48 kHz or ess n consideration of
copyr ghts ) When makng dgtal co_mections to an AV
amplifier that is not compatible with 96 kHz/88 2 kNz signa}s,
set to "ON"
When playing DVDs recorded in linear PCM or packed
PCM and the unit is set to output digilal and analog audio
signals simultaneously, the analog audio output signals
are also converted to 48 kHz or belowr so we recommend
sett ng to "OFF" and also making analog connections
/_} When "BASS ENHANCER (2 CHANNEL)" is selected:
OFF (Factory default}
No sou_d is produced from tl_e subvvoofer
ON
Sou_d is produced from the subwoofer
In this case, set the subwoofer to "YES" at the speaker
sett ngs
Remote cc_ltrol unit Remo_e contlo_ ul_i_
• --To exit the setup mode
Use the • cursor button to select "EXIT SETUP", then press the ENTER button It is also possible to quit
by pressing the SETUP button on the remote control unit
18