Denon DVD-3800 Bedienungsanleitung Seite 16

3
16
Use the • and • cursor buttons to select the desired
setti_lg, then press the ENTER button
_1_ When "TV ASPECT" is selected:
4:3 PS
Select this to play wide DVDs in the pan E_ sca_l mode
(with the sides of the picture cut off) Discs for which
pan _ scan is not specified are played in the letter box
mode
4:3 LB
Select this to play wide DVDs in the letter box mode
(with black strips at the top and bottom)
WIDE (16:9) (Factory default)
Select this to play wide DVDs in the full-screen1 mode
_2_ When "TV TYPE" is selected:
NTSC
Select this when your TV's video format s NTSC
If NTSC is selected, output format is fixed to NTSC
PAL
Select this when your TV's video format is PAL
If PAL is selected, output format is fixed to PAL
MULTI (Factory default)
Select this when your TV is compatible with both the
NTSC and PAL formats
If yOU play the disc _ec©rded NTSC forf_]at r sigr_al ffor_
video output termi_lal will be switched to NTSC is
selected, output format is fixed to NTSC
{3} When "VIDEO OUT" is selected: (NOTES)
PROGRESSIVE (Factory default)
Select this when using the DVD-3800 connected to a
progressive type TV
INTERLACED
Select this when usi_lg the DVD-33SS connected to an
interlace type TV
NOTES:
• For the compo_lent output only, t is possible to swdch
between interlace image output and proglessive rnage
output It s not possble to specify progressve image
output for the Video output connectors or S-Video output
connector
• When the progressive mode is selected, the interlaced
sound and picture may be slightly out of sync To use the
interlaced outpUtr set the setting to "INTERLACED"
_4}When "VIDEO MODE" is selected:
VIDEO
This mode is best suited for playir_g discs containing
video material
FILM
This mode is best suited for playing discs contai_ling
film mater al or video material recorded with the
progressive scan method
AUTO (Factory default)
The set identifies the type of matedal on the disc being
p]ayed (film or video) and selects the mode
automatically This mode is suited for playing discs
containing both film and video material
NOTE:
• If stripes of noise appear on the picture or the picture s
unclear when playing a specific DVD video disc, try
changing the video mode
Rerno_e contro; u,_t Re,y_c>_e_r_t_iunit
_5 When "SLACK LEVEL" s selected:
DARKER (Factory default)
Sets the video output signal's black level to the standard
level¸
LIGHTER
Reduces the standard level of the video output signal's
black level¸
Set this if the image on the TV is far too dark¸
(6When "AV1 VIDEO OUT" is selected:
VIDEO (Factory default)
Composite video signals will be output from the AVl
SCART terminal¸
S-VIDEO
S video signals will be output¸
RGB
RGB signals will be output¸
3
_7 When "SQUEEZE MODE" is selected:
"SQUEEZE MODE" - only effective for progressve
output
OFF (Factory default)
Set this to display 4:3 video signals over the entire
screen of a 16:9 TV
ON
Set this to display 4:3 video signals in the center of the
screen on a 16:9 TV
_8}When "PROGRESSIVE MODE" is selected:
MODE 1 (level detection mode)
(Factory default)
This is a mode for high precision detection of the source
type from the level of the video signals recorded on the
DVD
For DVDs on which the flag (identification signal) data is
recorded incorrectly, the picture quality may decrease
when flag detection is conducted¸
This mode is effective in such cases¸
MODE 2 (flag detection mode)
This is a mode for detecting the source type from the
source flag lidentification signal) recorded on the DVD
In dark scenes, distinguishing between video signals
and noise signals with level detection is difficult and the
picture quality may decrease¸
This mode is effective in such cases¸
• --To exit the setup mode
Use the • cursor button to select "EXIT SETUP", then press the ENTER button It is also possible to quit
by pressing the SETUP button on the remote control unit