Description Of The Control Panel - Clatronic BBA 2784 Bedienungsanleitung

5....-05-BBA 2784 GB1n 26.08.2003 15:07 Uhr
Insert the plug into a properly installed 230V/50Hz protective contact socket. Set the On/Off switch (H) to
the side of the appliance to "I".
1. DISPLAY
NORMAL SETTING
This displays signals when the appliance is ready for use. It corresponds to the normal program. "1 3:25" appears
on the display. The "1" specifies which program has been chosen and the "3:25" is the length of the program. The
position of two markings shows the degree of browning that has been selected and the weight. The basic setting
after switching the appliance on is: "superior weight" and "medium browning level". During operation the course
of the program can be read on the display. As the program proceeds the digits of the set time will decrease pro-
gressively. Other parts of the programme, such as the timer, heating, kneading, pause, rising, baking, keeping
warm and programme end are also shown in the display.
2. START/STOPP key
To start and stop the program. As soon as the START/STOPP key is pressed, the points of the time value start to
blink. Use the START/STOPP key to stop the program in any moment. Keep the key pressed until a signal beep is
heard. The starting position of the aforementioned start program appears on the screen. If you want to use a dif-
ferent programme, please select this using the AUSWAHL button before starting the programme.
3. TIME keys
The following programs can be started with the timer: NORMAL (1), WHITE BREAD (2), WHOLEMEAL (3) and
SWEET BREAD (4). The RAPID (5), DOUGH (6), NOODLE DOUGH (7) and MARMALADE (9) programs can
not be started with the timer. The hours and minutes after which the preparation should be started need to be
added to the relevant basic time for the specific program. The maximum time delay is 14 hours and 58 minutes
per programme.
Example: It is 8.30 p.m. and the bread must be ready the next morning by 7.00 a.m., i.e. in 10 hours and 30
minutes. Press the TIME key until 10.30 appears, that is to say the time between now (8.30 p.m.) and when the
bread must be ready.
When working with the timing function never use perishable ingredients such as milk, eggs, fruit, yogurt, onions,
etc.!
4. COLOR key
The desired browning level is set with this key: LIGHT – MEDIUM – DARK.
5. QUANTITY key
It provides for the following settings in the various programs:
LEVEL I = for small bread weights up to 750 g.
LEVEL II = for medium bread weights up to 1000 g.
LEVEL III = for large bread weights up to 1250 g.
In the recipes you will find our recommended quantities.
6. SELECTION key
Use this menu key to run one of the available programs described in detail in the „Bread Baking Machine
Program Phases" table. Use the programs for the following specialties:
1. NORMAL
2. WHITE BREAD
3. WHOLEMEAL
4. SWEET BREAD
5. RAPID
6. DOUGH
7. NOODLE DOUGH
8. YOGURT
9. MARMALADE
10. BAKING
Seite 19
Description of the Control Panel (F)
For white and wheat and rye bread. This program is used the most.
For the preparation of particularly light white bread
For wholemeal bread
for preparing sweet yeast dough, for example
for the kneading and baking of bread loafs of up to 1250 g.
To knead bread dough
for producing noodle dough
To make yoghurt bread weighing up to 1000 g
To cook marmalades and jams
To brown bread or cakes
19