Unpacking The Appliance; Start-Up; Overview Of The Components / Scope Of Delivery; Description Control Panel - Clatronic BBA 3774 Bedienungsanleitung, Garantie

Unpacking the Appliance

1. Remove the appliance from the package.
2. Remove all packaging material such as films, filler, cable holders and
cardboard.
3. Check the delivery contents for completeness.
4. Check the appliance for possible transport damage to prevent haz-
ards.
5. Should the package contents be incomplete or damages be found,
do not take the appliance into operation. Take it immediately back to
the dealer.

Start-up

1. Clean the appliance as described in chapter "Cleaning".
2. Wait until all of the parts are dry.
3. Place the baking tin into the appliance.
4. Electric Connection
4.1. Confirm that your mains voltage matches the specifications on
the type label before connecting to mains power supply.
4.2. Connect the appliance to a properly installed wall outlet.
A signal sounds and the display shows the default setting (see

"Description Control Panel"

"1 LCD Display"). The appliance is
then ready for use.
5. There is a protective layer on the heating element. To remove this,
operate the appliance for approximately 15 minutes with an empty
baking tin placed inside (without kneading hook). To do this, use the
programme "12. Bake".
NOTE:
Any smoke or smells produced during this procedure are normal.
Please ensure sufficient ventilation.
6. Disconnect the mains plug from the wall socket.
7. WARNING: Risk of burning!
Allow the baking tin to cool before wiping it with a damp cloth.
8. Following this, you can start baking.

Overview of the Components / Scope of Delivery

A Lid handle
B Lid with viewing window
C Baking tin
D Control panel with display
E Casing
F Side ventilation slots
G Kneading hook
Accessories
a Measuring cup
b Measuring spoon
c Hook for removing the kneading hook
Description Control Panel
1 LCD Display
Default Setting (Start Image)
This displays standby mode. It corresponds with the basic programme.
The display shows " I 3:00 ". The " I " stands for the selected programme;
" 3:00 " stands for the programme duration. The positions of two arrows
show the selected browning and the weight. The default setting after
turning the appliance on is: "Higher weight" (level ) and "Medium
browning" (Medium). During operation the display shows the pro-
gramme duration counting down.
BBA3774_IM

2 Button Start / Stop

Use this button to start, interrupt, and terminate a programme sequence
manually.
• After pressing the Start / Stop button the dots on the time display
start flashing. The programme shown in the display is in use.
• Briefly pressing the Start / Stop button during a programme interrupts
the programme sequence (except in the "keeping warm" phase). The
numbers indicating the time will flash in the display. Press the button
once again briefly to continue the programme. If you do not press the
Start / Stop button within 10 minutes, the programme will continue
automatically.
• Press the Start / Stop button at any time to cancel the programme.
Press and hold until on long acoustic signal sounds. The display
shows the starting position of the programme most recently used.
Press the Menu button to select a different programme. Depending
on the operation mode you may have to wait for the appliance to cool
down.

3 Button Weight (Weight)

In some programmes you can set the following levels:
Level = for a smaller bread weight
Level = for a larger bread weight
NOTE:
• The weight of the finished bread depends on the ingredients,
among other things. You can read more about this under
Regarding the Recipes" "Bread Weights and Volumes". When
using heavy bread doughs, such as rye-wheat bread, the bread
can weigh up to 1500 g.
• The levels affect the baking time. (
Recipe Ideas")

4 Programme Names

A short description of the programme can be found in the table under
item "7 Menu Button (Selection)".
5 Buttons / (Time)
Use the timer function to set the end time for a selected programme.
This function is available for the following programmes:
1. Basic 4. Quick
2. French 5. Sweet
3. Whole wheat 6. Gluten free
The programmes "7. Quick ", "9. Jam" and "12. Bake" cannot be
started with delay.
WARNING:
When using the delayed baking function, make sure the appliance will
not be unattended during operation.
• Press the / buttons to set the end time for the programme.
NOTE:
• Repeatedly press the / buttons to move the end time of the
programme by 10 minutes. If you keep the respective button
pressed down, the setting will operate in fast mode.
• The end of the programme can be delayed for a maximum of
13 hours.
• When selecting another programme, the previous timer setting will
be deleted.
• Do not use the timer function for recipes with perishable ingredients
such as milk, eggs, fruits, yoghurt, onions, etc.!
• The timer function is not suitable for gluten-free bread, which is
prepared with warm or hot water.
Example: It is now 8:30 p.m. and you want the bread ready the next
morning at 7:00 a.m., in 10 hours and 30 minutes. Set this value (10:30)
"Notes
"Programme Sequence and
8. Dough
10. Cake
11. Sandwich
77
19.05.21