Manual Operation; F) Inversion Of The Rotating Direction; G) Inversion Of The Swivel Direction; H) Reset - Renkforce GM107 Bedienungsanleitung

e) Manual Operation
• Select NAnU in the menu.
• Push the button ENTER (4) and use the buttons UP (2) and DOWN (3) to set the respective parameter:
P000-P255 PAN position
t000-t255 TILT position
r000-r255 Brightness red
G000-G255 Brightness green
b000-b255 Brightness blue
U000-U255 Brightness white
• Confirm your input with the button ENTER (4) and use the buttons UP (2) and DOWN (3) to set the next
parameter.
• Press the ENTER button (4) to confirm your input.

f) Inversion of the Rotating Direction

• Select rPAN in the menu.
• Push the button ENTER (4) and use the buttons UP (2) and DOWN (3) to set NO or YES.
NO The rotating direction is not inverted.
YES The rotating direction is inverted.
• Press the ENTER button (4) to confirm your input.

g) Inversion of the Swivel Direction

• Select rtLt in the menu.
• Push the button ENTER (4) and use the buttons UP (2) and DOWN (3) to set NO or YES.
NO The swivel direction is not inverted.
YES The swivel direction is inverted.
• Press the ENTER button (4) to confirm your input.

h) Reset

In case of function interferences, you may need to restart the moving head. For this, perform the following
steps.
• Select rSEt in the menu.
• Push the button ENTER (4) and use the buttons UP (2) and DOWN (3) to set NO or YES.
NO The RESET process is not performed.
YES The RESET process is performed.
32