Before use
Charging the appliance battery
NOTE
►
The battery is supplied partially charged.
Before first use, charge the battery in the charger for at least
3 hours. This guarantees full battery power. You can charge
the lithium-ion battery at any time without shortening its ser-
vice life. Interrupting the charging process does not damage
the battery.
►
If the battery charge level indicator
use, the battery has 30% of its capacity and needs to be
charged.
Start charging
♦
Connect the charger
device.
♦
Connect the charger
source.
■
The battery charge level indicator
ing. The indicator emits a red light during the charging process.
Once the display lights up green, the battery is fully charged.
Stop charging
♦
Disconnect the charger
♦
Disconnect the charger
device.
NOTE
►
The power tool does not work whilst charging.
It is not unusual for the handle to heat up a little during charging.
PAT 4 A1
lights up red during
to the charging socket
to a 100 - 240 V ~ 50/60 Hz power
shows the progress of charg-
from the mains power supply.
from the charging socket
on the
on the
│
GB
33
■