Phoenix Contact UM IA THERMOMARK X1.2 Handbuch Seite 77

Fonts
Vector/size
Font styles
Character spacing
Software
Windows drivers
Planning and marking software
Operating data
Voltage
Power consumption
Operating temperature
Humidity
Safety requirements
Cutter THERMOMARK X1-CUTTER, Order No. 5145290
Cutting length
Material thickness
Power supply
Outlet height
Perforator and cutter THERMOMARK W2-CUTTER/P, Order No. 5146244
Cutting length
Material thickness
Power supply
Outlet height
103938_ia_01
In width and height: 0.9 - 128 mm
TrueType fonts: Variable enlargement factor
Orientation: 360° in increments of 1°
Bold, italic, underlined, outlined, inverted, gray, vertical, depending on the
font type
Variable
Windows 2000, Windows XP 32/64bit, Windows 2003 32/64bit,
Windows VISTA 32/64 bit
CLIP PROJECT advanced / professional
100 V AC ... 240 V AC, 50/60 Hz, PFC
300 W, maximum
10 °C ... 35 °C
30 % ... 85%, without condensation
CE, FCC class A, CB, CCC
At least 5 mm
0.05 mm ... 1.2 mm
Via I/O connection on the printer
2.5 mm
At least 5 mm
0.05 mm ... 1.2 m
Via I/O connection on the printer
4.5 mm
Technical data
A-3
PHOENIX CONTACT