Connecting The Thermomark X1.2; Connecting To The Power Supply - Phoenix Contact UM IA THERMOMARK X1.2 Handbuch

THERMOMARK X1.2
2-2
PHOENIX CONTACT
2.3

Connecting the THERMOMARK X1.2

Mains and computer connections
Figure 2-1 Mains and computer connections
1 Mains switch
2 Mains female connector
3 Not supported (slot for Cardbus or Type II PC card)
4 Not supported (slot for Compact Flash memory card)
5 Ethernet 10/100 Base-T
6 Not supported (USB interface for keyboard or scanner)
7 USB high-speed slave interface
8 V.24 (RS-232-C) serial interface
2.3.1

Connecting to the power supply

The THERMOMARK X1.2 is equipped with a wide-range power supply unit. The device can
be operated with a mains voltage of 230 V AC/50 Hz or 100 V AC/60 Hz without any
adjustments or modifications.
ACHTUNG: Device can be damaged by undefined inrush currents.
Before connecting to the mains, set the mains switch (1) to "O".
• Insert the mains cable in the mains connection socket (2).
• Insert the mains cable connector into a grounded socket.
1
2
3
4
5
6
7
8
103938_ia_01