THERMOMARK X1.2
2-8
PHOENIX CONTACT
2.4.4
Printing
The THERMOMARK X1.2 is ready for operation when all connections have been
established, media and ink ribbon are inserted and the print head is locked.
In the case of continuous media, pressing the feed button before starting a print job will
result in an error message.
If the printer is still set for printing labels, it will look for the gap between the labels after the
feed button is pressed and output an error message.
However, the printer is still set to continuous media after a print job has been started.
Tear-off edge
Once printed, the media strips are torn off by hand. The printer is equipped with a tear-off
edge for this purpose.
A cutter (THERMOMARK X1-CUTTER, Order No. 5145290) is available as an accessory
for automatic label cutting. This blade is also suitable for processing continuous label
media.
A perforator and cutter (THERMOMARK W2-CUTTER/P, Order No. 5146244) is available
for marker sleeves.
103938_ia_01