Indicators During Printing - Phoenix Contact UM IA THERMOMARK X1.2 Handbuch

THERMOMARK X1.2
Table 3-2 Operating states
Ready
and configured symbol displays,
such as time and date
Printing Label
Pause
and the symbol
and error type
and the number of items to be printed
The pause key flashes,
the cancel and ↵ keys light up
and error type
and the number of items to be printed
The cancel key flashes and ↵ lights up
and the error type.
Key illumination has been switched off.
3-2
PHOENIX CONTACT
3.2

Indicators during printing

.
Cause/meaning
The printer is in the Ready state and can receive data.
The printer is carrying out a print job.
Data transmission is possible for a new print job.
The print job has been temporarily interrupted by the operator.
An error has occurred that can be corrected without canceling
the print job.
You can continue the print job afterwards.
An error has occurred that cannot be corrected without
canceling the print job.
An error occurred during system startup.
• Switch the printer off and on again at the mains switch or
• Press the cancel button.
If the error continues to occur, inform Phoenix Contact
If the printer is not used for some time, it switches to energy-
saving mode automatically.
• Press any key to cancel.
103938_ia_01