Loading Media And Printing; Notes On The Print Head - Phoenix Contact UM IA THERMOMARK X1.2 Handbuch

THERMOMARK X1.2
2-4
PHOENIX CONTACT
2.4

Loading Media and Printing

2.4.1

Notes on the print head

ACHTUNG: Use the correct materials
During printing, always make sure that there is no dirt on the media as this could be pulled
underneath the print head, which could cause damage.
ACHTUNG: Open the print head if it is not to be used for a longer period of time
If the THERMOMARK X1.2 is not used for several days, the print head must be opened.
This increases the service life of the print head.
ACHTUNG: Use suitable ink ribbon
The ink ribbon must be at least 5 mm wider than the media. Direct contact between the
print head and the media can lead to increased wear on the print head.
103938_ia_01