Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Vamp Measurement
Tick on „Amplitude", enter Home page ->Math->FFT, then two light red lines represent Cursor 1 and
Cursor 2 show along the horizontal direction on FFT window.
Place the mouse pointer over Cursor 1 or Cursor 2, drag after the mouse pointer changing to
,
adjust the position of Cursor 1 and Cursor 2 according to the waveform to be measured. The cursor
increment window on the bottom left of FFT shows current position of the two cursors, absolute
voltage amplitude difference of the two cursors. (See Figure below).
13. How to Set the Display System
to show Function menu, choose "Display".
Click
Display type
Click the button to choose to choose the display type (the chosen button has a
mark).
Vector
The space between the adjacent sampling points in the display is filled with the vector form.
-90-
Werbung
