PeakTech 1280 Bedienungsanleitung Seite 61

3. Ports Introduction
3.1. P 1280 / P 1285
1.
2.
3.
Figure 0-1 Ports of the Oscilloscope (take P 1285 for instance)
1. RS-232C Port (optional)
2. USB port: Supply power by PC USB or the adapter; communicate with PC
3. LAN port (optional): Network port which can be used to connect with PC
4. Probe Compensation: Measurement signal (3.3/1KHz) output
5. MULTI input, trigger output or Pass/Fail output and EXT trigger input
6. Signal input of Channel 2
7. Signal input of Channel 1
Note: If you use LAN port to communicate with PC, the oscilloscope must be powered by the adapter.
-61-
4.
5.
6.
7.