Werbung
Verfügbare Sprachen
Verfügbare Sprachen
22.5. Set the network parameters of the software
(1)
Supply power:
Disconnect the USB cable from the computer. Connect it with the AC-DC adapter.
the adapter into an electrical outlet to power the oscilloscope.
(2)
Connect to the router:
Use a LAN cable to connect the oscilloscope with a router; the computer should be connected
to the router too.
(3)
Set parameters in menu:
Click
to show Function menu, choose "Utility", click "Network". Set IP and Port to the
same value of the oscilloscope in step 2.
(4) Click "Connect"
-108-
Plug
Werbung
