Werbung
Verfügbare Sprachen
Verfügbare Sprachen
22.2. Set the network parameters of the software
(1)
Supply power: Disconnect the USB cable from the computer. Connect it with the AC-
adapter. Plug the adapter into an electrical outlet to power the oscilloscope.
(2)
Connection: Plug in the LAN line to the LAN port of the oscilloscope; plug the other
end into the LAN interface of the computer.
(3)
Set parameters in menu: Click
"Network". Set IP and Port to the same value of the oscilloscope in step 2.
Click "Connect"
(4)
to show Function menu, choose "Utility", click
-105-
Werbung
