PeakTech 1280 Bedienungsanleitung Seite 67

®
6. PeakTech Oscilloscopes Software Help
Minimum PC Requirements
Processor: Pentium(R) 4 2.4 GHz
Memory: 1 GB
Disk space: 1 GB minimum
Recommended PC Requirements
Processor: Pentium(R) Dual-Core 2.4 GHz
Memory: 2 GB
Disk space: 1 GB minimum
Other Requirements
Operating system: Windows XP (32-bit & 64-bit), Windows Vista (32-bit & 64-bit), Windows7 (32-bit &
64-bit), Windows 8 (32-bit & 64-bit)
Ports: USB 2.0
Display Resolution: 1024 x 76
PC Software USB Driver Install Guide
Use the supplied USB cable to connect the oscilloscope with a PC through their USB ports.
Note: If you use a U SB cable that is not supplied by us, some problems such as connection error and
signal disturbing might occur.
For Windows Vista or Windows 7
The Microsoft Windows Systems since Windows Vista or Windows 7, change a lot, which require a
new installation guide of USB driver. Here it is.
During the whole installation, please assure that the device is running well and plugged into PC from
USB.
Right click [Computer], you can find it on the desktop, or in [Start] menu.
In the popup menu, click [Manage] and it will open a window named "Computer Management", as
follow, in the left side click [Device Manager], it will show a devices tree in the middle, and then click
the last one button "Scan for hardware changes" in tool bar as follow, and if the device is running well
and plugged into PC, computer will detect an unknown device with a "!" icon.
-67-