Expanding Switchable Signals; Expanding Through Port Grouping - Guntermann & Drunck DVICenter DP32 Installationsanleitung

Expanding switchable signals « Central module

Expanding switchable signals

You can expand a computer's or a console's switchable signals either through port
grouping or stacking.
EXAMPLE: To transmit a second video signal and a USB 2.0 signal of the same
computer, in addition to the
module (second video channel) and a
computer.
In addition to the
channel) and a
tioned computer is accessing.
With the DVICenter, you can switch various computer modules of one computer or
various user modules of one console at the same time.
To expand the switchable signals, you can use two different ways of connection:
In the Config Panel web application, you can assign the KVM channel
 Port grouping:
of a computer or console with up to seven additional video channels and a USB or
RS232 channel.
NOTE: Only in this mode, you can hold the USB signal using the OSD's
menu at the currently accessed computer. If you switch to another computer after
pressing the hold function, the USB signal remains on the computer that you
accessed first.
After disabling the hold function on the
the currently accessed computer.
 Stacking: In Stacking mode, you can switch multiple matrix switches at the same
time. Connect multiple matrix switches to the
lite matrix switch for each additional user module of one console.

Expanding through port grouping

In the Config Panel web application, you can assign up to seven additional video chan-
nels and a USB or RS232 channel to a computer's or a console's KVM channel.
Assigning multiple ports to a console or computer creates a multichannel configuration.
NOTE: The OSD does not show any user or computer modules that you added as
additional channels to the multichannel configuration.
21 · G&D DVICenter DP32
DVI-CPU
DVI-CON user module, connect the
U2-CPU module (USB2.0/RS232) to the console, the aforemen-
computer module, connect a second
module (USB2.0/RS232) to the
U2-CPU
DVI-CON-Video
Operation menu, the USB signal switches to
Bus ports. Connect an additional satel-
DVI-CPU
(second video
Operation