Maintenance Works; Troubleshooting; Fault Indication - Kärcher SB-Wash-E 10 Bedienungsanleitung

Maintenance Works

Change oil
Danger!
Danger of burning because of hot oil and
hot equipment. Let the pump cool down for
15 minutes before making the oil change.
Notice
Used oil may only be disposed at an appro-
priate collection station.. Please deposit the
used oil there. Polluting the environment
with used oil is an offence.
1 Lid of the oil container
2 Oil outlet screw
 Prepare a collecting vessel for used oil
 Remove the lid of the oil container.
 Take the oil outlet screw off and collect
the used oil.
 O-ring 11x2 (order number: 6.362-458)
change it and put the oil outlet screw
back on..
 Pour the oil into the oil container till the
mark MAX.
 Lock the oil container with the lid.
 Take the used oil to the used oil collec-
tion station.

Troubleshooting

Danger!
There is danger of injury while working at
the equipment.. Concerning all works
 disconnect the input water, close the
water supply,
 disconnect the power supply, shut off
the customer emergency main switch,
and secure, that it can not be turned on.
Notice
If the main power supply is interrupted
(main power supply interruption, customer
emergency off main switch is put to „0") the
clock in the control head of the base ex-
changer will stop and must be readjusted.
Danger!
danger of injury because of possible dam-
aged parts of the high pressure jet, danger
of burns because of hot equipment parts..
When working, while the equipment is open
take special care, and obey all safty notic-
es!.
The following parts are possible to be hot-
ter than 50 °C:
Warm water tank
–
cylinder head of the high pressure
–
pump
high pressure hose
–
32
Who may take care of interrup-
tions?
Operator
–
Performances containing the notice
"operator" may only be performed by in-
structed individualls, who are able to
operate and service high pressure
equipment.
Electrician
–
Individuals with an education in the
electric field.
Maintenance
–
Performances with the notice "mainte-
nance" may only be performed by the
Kärcher- Maintenance-Mechanics.

Fault indication

At the operating panel
1 Indicator lamp for heating is activated
2 Control light water softener empty (op-
tional), regeneration (optional)
In the washing period display
If the lower washing period display blinking
red, then an interruption is shown at the
control circuit.
11
-
EN