Herunterladen Inhalt Inhalt Diese Seite drucken

Maintenance And Care; Maintenance Intervals; Maintenance Works - Kärcher HDS 995 M Eco Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für HDS 995 M Eco:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Flush device with anti-freeze agent
Note
Observe handling instructions of the anti-
freeze agent manufacturer.
Fill anti-freeze agent of the trade into
swimmer container.
Switch on appliance (without heater) till
the appliance has been completely
rinsed.
A certain corrosion protection is achieved
with this as well.

Maintenance and care

Danger
Risk of injury! Always disconnect the device
from the electrical power supply before per-
forming maintenance or repair work.
Warning
Only use original spare parts.
After each work, turn off device, refer to "Af-
ter each operation".
Set the appliance switch to "0".
Disconnect the main plug from the sock-
et.
Shut off water supply.
Activate hand spray gun until device is
pressure less.
Remove water connection.
Allow device to cool down.
Your Kärcher vender will inform you
about the performance of a periodic
safety inspection resp. signing of a
maintenance contract.

Maintenance intervals

Weekly
Clean the sieve in the water connection.
Clean the fine filter.
Check oil level.
In case of lacteous oil inform Kärcher
customer service immediately
Monthly
Clean sieve in the water shortage safe
guard.
Clean filter at the detergent suck hose.
After 500 operating hours, at least annu-
ally.
Oil change.

Maintenance Works

Indicator lamp: Engine/ Electronics is lit
up
Figure 2 - Pos. 7
This indicator lamp is lit up when certain
maintenance jobs are necessary on ac-
count of reaching a certain number of oper-
ating hours.
Carry out the necessary maintenance
jobs.
Open the covering flap of the storage
compartment.
Press the Reset button of the electronic
display for at least 7 seconds until the
indicator lamp goes off.
Display
Necessary maintenance jobs
Do a visual check.
Check high pressure connections for
leaks.
Clean fuel tank und fuel filter.
Display
Necessary maintenance jobs
Check pump for leaks.
Change oil in the pump.
Clean the sieve in the water connection.
Clean sieve in the water shortage safe
guard.
29
English

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Hds 995 mx ecoHds 1295 s ecoHds 1295 sx eco

Inhaltsverzeichnis