Initial Start-Up; Ec Declaration Of Conformity - Kärcher SB-Wash-E 10 Bedienungsanleitung

Installation of the base exchanger
(optional)
 Lead the overflow hoses of the base ex-
changer and the salt tank into the drain
water pipes.
 Remove the lid of the base exchanger
head.
1 Program display
2 Scala of the time switch
 Push and hold the red program indica-
tor at the head of the circuit.
 With the other hand turn the camshaft
towards the arrow (against the clock) at
the start of the field "back rinse", the
control light RM 110/Anti calc system
lights up.
 wait 1 to 2 minutes.
 Fill the salt tank with 10 liter of water
 Push the red program indicator at the
circuit head, and move it close to the
field "fill + clean wash" and turn it.. After
a couple of minutes, the salt tank will be
filled (duration approximately 9 min-
utes). After it is filled, the water must be
above the strainerfloor of the salt tank.
 Pull the time switch, and turn to the ac-
tual time.
 Put the lid of the base exchanger back
on.
 Fill the salt tank all the way to the top
with salt in form of tabletts.
Filling in detergents
 Open the detergent container and fill in
detergent.
Pour in water softener (optional)
1 Dosing container
 Remove the cover of the dosing con-
tainer and fill in RM 110.
 Close the lid again.
36

Initial Start-Up

 Switch on the plant at the operator pan-
el to "1/ON".
 Select cleaning programme 1.
 Check existing settings at the control
panel or do your own settings.

EC Declaration of Conformity

We hereby declare that the machine de-
scribed below complies with the relevant
basic safety and health requirements of the
EU Directives, both in its basic design and
construction as well as in the version put
into circulation by us. This declaration shall
cease to be valid if the machine is modified
without our prior approval.
Product: High-pressure cleaner
Type: 1.319-xxx
Relevant EU Directives
2006/42/EC (+2009/127/EC)
2006/95/EC
2004/108/EC
2000/14/EC
Applied harmonized standards
EN 60335–1
EN 60335–2–79
!! VERALTET !! bitte 14375 verwenden
EN 55014–2: 1997 + A2: 2008
EN 61000–3–2: 2000 + A2: 2005
EN 61000–3–3: 2006
Applied conformity evaluation method
2000/14/EC: Appendix V
Sound power level dB(A)
Measured: 69
Guaranteed: 71
The undersigned act on behalf and under
the power of attorney of the company man-
agement.
CEO Head of Approbation
Authorised Documentation Representative
S. Reiser
Alfred Kärcher GmbH Co. KG
Alfred-Kärcher-Str. 28 - 40
71364 Winnenden (Germany)
Phone: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, 2011/07/01
15
-
EN