Recording A Source On Tape, Md Or Video Cassette - Yamaha DSP-E800 Bedienungsanleitung

RECORDING A SOURCE ON TAPE, MD OR VIDEO CASSETTE

Recording adjustments and other operations are performed
from the tape deck, MD recorder or VCR. Refer to the
instructions for these components.
NATURAL SOUND AV PROCESSOR/AMPLIFIER DSP–E800
STANDBY/ON
– SET MENU + NEXT TAPE/MD MON EFFECT
/6CH INPUT
6CH INPUT
CD
DVD/LD
SLEEP
–
1
Set VOLUME to the "m"
position.
2
Select the source you want to record.
INPUT SELECTOR
Front panel
3
Begin recording by the tape deck, MD recorder
or VCR connected to this unit.
4
Play the source and then turn up the volume to
confirm the input source.
VOLUME
16
20 12
28
40
60
00 0
–dB
Front panel
2
D I G I T A L
DOLBY
CINEMA DSP
D I G I T A L
S U R R O U N D
VOLUME
INPUT SELECTOR
16
20 12
28
40
INPUT MODE
60
00 0
–dB
PROGRAM
TUNER TAPE/MD
2
D – TV VCR
CBL/SAT
MUTING
+
VOLUME
4
VOLUME
16
20 12
28 8
40 4
60 2
00 0
–dB
Front panel
CD TUNER
DVD/LD D – TV VCR
or
CBL/SAT
Remote control
8
– +
VOLUME
or
4
2
Remote control
y
If a tape deck or MD recorder is being used for recording, you can
monitor the sounds being recorded by pressing TAPE/MD MON /
6CH INPUT (or TAPE/MD).
1,4
Notes
• The DSP program and the setting of VOLUME have no effect on
8
the material being recorded.
4
2 • Composite video and S video signals pass independently through
this unit's video circuits. Therefore, when recording or dubbing
video signals, if your video source component is connected to
provide only an S video (or only a composite video) signal, you
can record only an S video (or only a composite video) signal by
your VCR.
• A source connected to this unit only through the digital terminals
cannot be recorded by the tape deck, MD recorder or VCR
connected to this unit.
• A source connected to the 6CH INPUT terminals of this unit
cannot be recorded.
• Check the copyright laws in your country to record from records,
CDs, radio, etc. Recording of copyrighted material may infringe
copyright laws.
If you play back a video source that uses scrambled or
encoded signals to prevent it from being dubbed, the
picture itself may be disturbed due to those signals.
E-21