Before Initial Use; Unpacking The Items Supplied; Inserting / Removing The Handle Pole; Connecting The Nozzles - Cleanmaxx Z 05107 - XL-312-80 Gebrauchsanleitung

Before Initial Use

Unpacking the Items Supplied

CAUTION!
❐ Danger of suffocation! Keep the packaging material away from children and animals.
❐ Make sure that the device is not connected to the mains power before you attach or
detach the accessories.
Unpack all parts and check the items supplied for completeness (see the "Items Sup-
plied and Device Overview" chapter) and transport damage. If you fi nd any damage
to the components, do not use them (!), but contact our customer service department.

Inserting / Removing the Handle Pole

Connecting the Nozzles

CAUTION!
❐ Always switch the device off fi rst and pull the mains plug out of the plug socket be-
fore you attach or remove any accessories.
❐ Do not lean on the device and do not place it on furniture or uneven surfaces. Carry
the device exclusively by the carrying handle to move it.
You can place the nozzles directly onto the device.
Notice: You can use the vacuum cleaner to clean fl oors with both
the handle bar and fl oor nozzle or as a hand-held vacuum cleaner
with the tile nozzle to clean diffi cult to reach areas or the brush
nozzle for all objects and furniture.
• Push the handle bar into the receptacle on the base unit. The
handle bar must audibly lock into place.
• When you want to detach the handle pole, push the release
button and pull the handle pole out of the main unit.
1. Mount the nozzles on the nozzle adapter under the dust
bin.
2. To remove the nozzles, simply pull them off.
3. If you want to use the brush nozzle, mount it on the tile
nozzle.
19