Cancom-Status-Pdos; Cancom-Status-Pdo; Cancom → Master; Modem Status - IFM Electronic Ecomot100 CANcom III Handbuch

CAN CR310
COM X
Contents:
PDO type:
Data direction:
Comment:
Data byte Parameter
0 PDO-Mux
1 Mod.-Typ
2 Netw.-Stat
3 Sign.-Qual.
4 Status PIN
5 GSM-Init Cnt.
SIM-Memory
6 Modem Result
7 GSM-Init/
Status
66
PAGE

Modem status

CANcom-Status-PDO

CANcom → Master
Contains the status of the modem
Meaning
Modem status
Modem type
Network status
Signal quality
Status
SIM PIN no.
GSM
initialisation
counter or
number of the
SMS memory
locations
on the SIM card
Contains
the result code
of the modem
Contains
the initialisation
status
of the modem
Value
0
0 = GSM modem
1 = analog modem
2 = ISDN modem
0 = not logged in
1 = logged in
2 = not logged in,
but in search
3 = log in rejected
by network
4 = not known
5 = logged into
another network
0 = ≤ -113 dBm
1 = -111 dBm
2-30 = -109... -53 dBm
31 = ≥ -51 dBm
99 = not known
0 = PIN no. is wrong
1 = PIN no. is ok
NOTE
Entering the wrong
PIN no. several times
blocks the SIM card!
GSM-Init Cnt
= 0 to 14
SIM memory depends
on SIM card used
(typ. 10 to 14)
0 = ok
1 = Modem is connected
to the remote station
2 = Modem is called
3 = No connection
4 = Invalid command
5 = No dial tone or dialling not possible
255 = modem timeout occurred
0 = Modem is ready
1 = Modem in the
process of being
initialised
Comment
PDO identifier
At present
only GSM modem
Only valid with GSM
Only valid with GSM
Only a correct
PIN no. allows
communication
with the modem!
The value of the
GSM-Init/status
(data byte 7)
determines the
contents.
GSM-Init/status = 1,
then data byte 5 =
GSM-Init Cnt.
GSM-Init/status = 0,
then data byte 5 =
SIM memory
GSM-Init/status
also determines
the contents of the
data byte (DB) 5