IFM Electronic Ecomot100 CANcom III Handbuch Seite 59

Function: TELEDATA_SMS
Library: CANCOM_a.lib
Purpose: Initialises CANcom and enables
the transmission of SMS strings
or an SMS message.
This function block must be inte-
grated with all operating modes
(e.g. direct transmission)!
Parameters
Name Data type
Inputs
NET_STARTED BOOL
WITH_CRC BOOL
PASSWORD WORD
GSM BOOL
FAX BOOL
EMAIL BOOL
RECEIVER DWORD
TX_MESSAGE DWORD
CLEAR_SMS BOOL
NODE_ID BYTE
GLOBALDATA DWORD
Outputs
ONLINE BOOL
TX_STATUS BYTE
TX_CNT WORD
RECEIVED BOOL
RX_CNT BYTE
RX_MESSAGE STRING (255)
IS_DATA_SMS BOOL
Notes
Before starting the function with ENABLE = TRUE the CAN network must be
started with the functions "COP_MSTR_MAIN" and "COP_MSTR_BOOTUP".
Description
TRUE: CAN network was started successfully (OPERATIONAL)
TRUE: Transmission with checksum
Password
TRUE: SMS transmission is activated,
a rising edge is waited for
TRUE: SMS transmission to a fax machine is activated,
a rising edge is waited for
TRUE: SMS transmission to an e-mail address is activated,
a rising edge is waited for
tel. no., fax no. or e-mail address of the receiver as string
(allocation via ADR operator)
Transmission message as string (allocation via ADR operator)
TRUE: Stored messages are cleared
Node ID of the CANcom radio modem
Global structure variable "CANCOM_GLOBAL_STRUCT"
(allocation via ADR operator)
TRUE: CANcom is connected to the provider
CANcom status 0 = not working
1 = finished
2 = busy
3 = error
Number of messages transmitted
TRUE: received new messages
Number of messages received
Received message as a string
(max. 255 characters)
TRUE: SMS contains binary coded data
CAN
COM
TELEDATA_SMS
NET_STARTED ONLINE
WITH_CRC TX_STATUS
PASSWORD TX_CNT
GSM RECEIVED
FAX RX_CNT
EMAIL RX_MESSAGE
RECEIVER IS_DATA_SMS
TX_MESSAGE
CLEAR_SMS
NODE_ID
GLOBALDATA
CR310
X
59
PAGE