Siemens SINUMERIK 840D sl Handbuch Seite 1371

Tabelle 4- 1 Übersicht: Tastenfilter in Konfigurationsdatei pcuhwsvc.ini
Abschnitt
Schlüssel
Wert
Werkseinstellung
pcuhwsvc.ini (Vorlage im Verzeichnis ...\siemens\System\etc)
[GLOBAL]
# -----------------------
# SIEMENS GLOBAL SECTION
# -----------------------
# enable logfile PCUHardwareservice.log
EnableLogFile=0
# Emulating of "Mode-Switch" from Sinumerik PCU50 Box.
# "Mode-Switch" is a rotary switch, which is attached to the rear side of the PCU50 V5
Box.
# About this, different methods of booting the computer are controlled.
# 0 Normal mode
# 3 Desktop mode (welcome screen)
ModeSwitch=0
[SERVER]
FTP=hmisvr PCU betaftpd
DHCP=hmisvr PCU udhcpd
TFTP=hmisvr PCU netkit-tftpd
TCUHWS=hmisvr TCU hardware services
VNC=uvnc service
[APPLICATION]
# ---------------------------------------
# STARTUP APPLICATION DIAGNOSTIC SECTION
# ---------------------------------------
[KEYB FILTER]
# -------------------------------------------
# SIEMENS KEYBOARD-FILTER DRIVER SECTION
# -------------------------------------------
# Filtering Key Sequences
# =======================
# Activation of Key-Sequences to be ignored
# SeqAct x
# The following 20 sequences are implemented
# 0 CTRL-ALT-DEL
# 1 ALT-F4
# 2 ALT-TAB
# 3 LEFTSHIFT-ALT-TAB
# 4 RIGHTSHIFT-ALT-TAB
# 5 CTRL-ESC
# 6 ALT-ESC
# 7 ALT-SPACE
# 8 (SHIFT)-CTRL-F1
# 9 (SHIFT)-CTRL-F2
# 10 (SHIFT)-CTRL-F3
# 11 (SHIFT)-CTRL-F4
PCU-Basesoftware (IM10)
Inbetriebnahmehandbuch, 01/2015, 6FC5397-1DP40-5AA2
Installation und Konfiguration von Updates und Automatisierungssoftware
[KEYB_FILTER]
SeqActive_x
0 = Spezifische Tastatureingabe aktiviert
1 = Spezifische Tastatureingabe wird gefiltert und ist deakti-
viert
1
4.5 Tastenfilter für HMI-Software konfigurieren
51