Siemens SINUMERIK 840D sl Handbuch Seite 1210

System in Betrieb nehmen
1.4 BIOS Einstellungen für PCU 50.3
Hardware Options
Fan Control
CRT / LCD selection
Menü: Advanced
Systemparameter
Installed O/S
Reset Configuration Data
Legacy USB Support
USB controller restart
I/O Device Configuration
Internal COM 1
Base I/O address
Interrupt
PCI-Configuration
PCI Device Slot 1
Option ROM Scan
Enable Master
Latency timer
PCI Device Slot 2
Option ROM Scan
Enable Master
Latency timer
SATA/PATA Configuration
PATA Controller
SATA Controller mode
AHCI Configuration
RAID support
Menü: Security
Systemparameter
Supervisor Password Is
User Password Is
Set User Password
Set Supervisor Password
36
Enabled
Simultan. Auto
Standardeinstellungen
Other
No
Disabled
Enabled
Enabled
3F8
IRQ 4
Enabled
Enabled
Default
Enabled
Enabled
Default
Enabled
Enhanced
Disabled
Disabled
Standardeinstellungen
Disabled
Disabled
Enter
Enter
Inbetriebnahmehandbuch, 02/2014, 6FC5397-1DP40-4AA0
Eigene Eintragungen
Eigene Eintragungen
PCU-Basesoftware (IM8)