Connectors - Teldat elmeg hybird 300 Benutzerhandbuch

Teldat GmbH
LED
Power
Status
SD card
Uploaded Ex-
cel file
The rack-mounted system LEDs are located at the front of the housing.
Fig. 4: LEDs (rack-mounted system)
LED status display elmeg hybird 600
LED
1 Power
2 Status
3 SD card
4
5
6
Note
For replacement of modules 1 - 6 during operation of the elmeg hybird 600, LEDs 1 - 6 are assigned
to slots 1 - 6. You'll find information on module replacement in the installation instructions.

6.4 Connectors

The connections are arranged as follows:
hybird 300 / hybird 600
Status Information
flashes red Power Management
lights up green Operating voltage present
flashes red System messages exist
flashes green Operating status
lights up green The elmeg hybird is initialised
flickers green Data being written/read
lights up green Memory card detected but no access
currently no
function
Status Information
flashes red Power Management
lights up green Operating voltage present
flashes red System messages exist
flashes green Operating status
lights up green The elmeg hybird is initialised
flickers green Data being written/read
lights up green Memory card detected but no access
Function in
module re-
placement
Function in
module re-
placement
Function in
module re-
placement
6 Technical data
31