Three-Party Conference - Teldat elmeg hybird 300 Benutzerhandbuch

4 Operation via the telephone

4.2.19 Three-party conference

The conference ends when your replace the receiver. A subscriber included in the conference can hang up at any
time; in this case, the initiating subscriber continues the call with the remaining subscriber.
4.2.20 Call forwarding (CF)
Note
Using the length of the number, the elmeg hybird automatically detects whether there should be call
forwarding to an internal or external subscriber. When call forwarding to an external subscriber, the
destination number is always entered without dialling code.
Activating call forwarding
Turning off call forwarding
20
You are calling a subscriber and want to include another subscriber in this call.
Press the R key. You will hear the internal dial tone.
If you wish to speak with an external subscriber, first dial
Dial the subscriber you want. You hear the ringing tone. Your correspondent is being
called. The person lifts the receiver.
You want to include the subscriber in the first call.
Dial .
You hold the conference call.
You want to remove the first subscriber added from the conference. The subscriber is
then put on hold for enquiry.
Dial .
You speak with the second subscriber again. The first subscriber is on hold.
Lift the receiver. You hear the internal dialling tone.
Press the star button.
Dial for immediate call forwarding.
or
Dial for permanent call forwarding if no answer.
or
Dial for permanent call forwarding if busy.
Select the destination number for call forwarding (without dialling code)
Confirm your input with the # key.
You hear the positive acknowledge tone.
Replace the receiver.
for the exchange.
hybird 300 / hybird 600
Teldat GmbH