User Access; Software Update - Teldat elmeg hybird 300 Benutzerhandbuch

3 Basic configuration
(1) To do this, select the Numbering->User Settings->Class of Services menu. In the authorisation class table,
open
(2) Under Trunk Line Selection with Line Access Number , go to Add then select your SIP provider. Confirm
your choice with Apply.
User
A
(1) In the table, open
number.
(2) Click Add and enter the corresponding internal number of the terminal (e.g.
enter a name under Displayed Description (e.g.
Confirm your entries with Apply.
Call Assignment
In the last step, you must assign an internal number to the SIP entry.
(1) Select the Numbering->Call Distribution->Incoming Distribution menu.
(2) Open your SIP entry, by clicking
(3) Save your entries with OK.
Once you've performed the settings, you're able to make internal and external calls. Save the configuration by click-
ing the Save configuration button above the menu tree and confirming the subsequent queries, if any.
Connecting telephones
Connect your IP system telephone. Confirm entries in the display, and in the telephone specify the IP address of
your system elmeg hybird as gateway IP address. The telephone logs in as guest. The IP system telephone dis-
plays . Under Numbering->Terminal Assignment you see under System Phone your system telephone, or
under VoIP (if you log in an IP telephone), your IP telephone. Open your telephone entry by clicking
an internal number under Internal Number. In a couple of minutes, the telephone is registered;
displayed on the IP system telephone.

3.3 User access

The system administrator can set up an individual configuration access for the users. You, the user, can thus display
your most important personal settings and individually customise some of these.
To log into the configuration interface with the access data you have been assigned, enter your User Name and your
Password in the login window.
Basically, there are two differing types of user accesses: Accesses freely defined by the administrator, created in
theNumbering->User Settings->Users menu, and those of user assigned to system telephone book, connection
data, hotel function and mini call centre applications. The users created by the administrator have access to a
sharply restricted configuration interface, the scope of which you can gather from the User Access chapter. Users
that assigned to applications can view the menu corresponding to the applications, as also available to the adminis-
trator.
You can access help on available configuration options via the online help system.

3.4 Software Update

The range of functions of the elmeg hybird system is continuously being extended. These extensions are made
available to you by Teldat GmbH. Checking for new software versions and the installation of updates can be carried
out easily with the GUI. An existing internet connection is needed for an automatic update.
Proceed as follows:
8
by clicking .
is already entered in the Numbering->User Settings->Users menu.
by clicking
. Under Internal Number, select the number you want.
. Then go on the Trunk Numbers tab to enter the internal
).
) under Internal Number and
and select
is no longer
hybird 300 / hybird 600
Teldat GmbH