Switch Contacts - Teldat elmeg hybird 300 Benutzerhandbuch

Teldat GmbH
4.2.26 Hotel functions
The elmeg hybird features extensive hotel functions. These functions are operated from reception telephones via
the system menu on the elmeg hybird.
Set hotel room status
By dialling a code from the room telephone, it is possible to determine the current status of the room. This can only
be evaluated and displayed in conjunction with a software hotel application.
Set hotel room status

4.2.27 Switch contacts

The elmeg hybird 300 / elmeg hybird 600 has two independent switch contacts which can be used as on/off
switches or keys, i.e. the electric circuit is closed, opened or closed for a set period of time.
These functions are controlled by dialling code numbers either internally or externally.
Close switch contact
Open switch contact
Close switch contact on a time-controlled basis (key)
hybird 300 / hybird 600
Lift the receiver.
Activate the code.
Dial code = room not clean,
You hear the positive acknowledge tone.
Replace the receiver.
Lift the receiver.
Press the * key.
Dial the code.
Determine the switch contact to be closed.
Lift the receiver.
Press the # key.
Dial the code.
Determine the switch contact to be opened.
Lift the receiver.
Press the * key.
Dial the code.
= room clean or = room clean and checked room.
4 Operation via the telephone
25