Chapter 1 Introduction - Teldat elmeg hybird 300 Benutzerhandbuch

Teldat GmbH

Chapter 1 Introduction

The devices of the elmeg hybird product family constitute a combination of IP PABX system and classic PBX sys-
tem. As with hybrid installations, the devices can be used as a straightforward IP PABX or PBX system. elmeg hy-
bird 600 is a purely rack-mounted version and supports up to 120 users, while elmeg hybird 300, the version for
wall mounting, is appropriate for up to 60 users. The scope of functions can be upgraded with modules or software li-
cences, e.g. by adding PBX interfaces such as S0, Up0 or analogue interfaces, or by increasing the number of pos-
sible SIP connections. Hotel and mini call centre solutions can be deployed without licence, along with language ap-
plications allowing production of a function such as "announcement before query", for example, or music-on-hold
produced with your own Wave files. The hybird voicemail system includes two voicemail boxes by default. Additional
voicemail boxes may be activated via licence packets subject to charge.
Safety notices
The safety notices included in the installation instructions tell you what you need to consider when using your el-
meg hybird.
Installation
How to connect your device is shown in
liminary tasks are necessary for configuration.
Configuration
How to create a basic configuration is shown in chapter
Password
If you are familiar with the configuration and you wish to get started straight away, all you really need are the preset
user name and password.
Note
User Name:
Password:
Standard IP
Netmask
Note
When you log onto your device for the first time, you are prompted to change the password. To be able
to configure your device, you must modify the password. All devices are delivered with the same pass-
word. which means they are not protected against unauthorised access until you change the password.
Observe the directions on your screen while performing the modification. You'll find detailed information
in the
DIME Manager
The devices are designed for use with Dime Manager. The Dime Manager management tool can quickly and simply
locate your elmeg devices in the network. The .NET-based application, which is designed for up to 50 devices, offers
easy to use functions and a comprehensive overview of devices, their parameters and files.
All devices in the local network, including devices that can be reached over SNMP, are located using SNMP Multic-
ast irrespective of their current IP address. A new IP address and password and other parameters can also be as-
signed. A configuration can then be initiated over HTTP or TELNET. If using HTTP, the Dime Manager automatically
logs into the devices on your behalf.
System software files and configuration files can be managed individually as required or in logical groups for devices
hybird 300 / hybird 600
Setting up and connecting
Modify system password on page 6 chapter.
on page 3. This chapter also tells you what pre-
Basic configuration on page 5.
1 Introduction
1