Teldat elmeg hybird 300 Benutzerhandbuch Seite 63

Teldat GmbH
4.2.17 Connect (ECT)
Connecting two subscribers
Note that ISDN terminals can only use the "Connect" feature via a particular key or menu function. The following pro-
cedure is not suitable for ISDN telephones.
4.2.18 Broker
hybird 300 / hybird 600
You are making an internal or external call. You want to forward the call to another sub-
scriber.
Press the R key. You hear the internal dialling tone.
If you hear the engaged tone, press the R button again to return to the call.
Dial the internal subscriber. You hear the ringing tone. Your correspondent is being
called. The person lifts the receiver.
Have your conversation. Announce that you are forwarding the call.
Replace the receiver. The person whose number you dialled continues the call.
You're conducting a call with subscriber 1; another call is signalled, e.g. by call waiting.
Dial the code. Extension 2 picks up, you can talk to him. Extension 1 is on hold.
You want to connect both extensions. Dial the code.
The two subscribers are interconnected. The connection costs are paid by the party that
established the respective connection.
You are making a call and want to speak to another subscriber without the first subscriber
hearing this conversation.
Press the R key. You will hear the internal dial tone.
If you wish to speak with an external subscriber, first dial
Dial the subscriber you want. You hear the ringing tone. Your correspondent is being
called. The person lifts the receiver.
You have a conversation. The first call is held.
Dial the code to return to the first call, the second call is put on hold. By pressing the
code, you can switch back and forth between the two subscribers.
or
You can terminate the call being held. Dial
or
You can terminate the current call. Dial
for the exchange.
.
.
4 Operation via the telephone
19