Teldat elmeg hybird 300 Benutzerhandbuch Seite 62

4 Operation via the telephone
Accept call waiting (hold for enquiry to the call waiting party)
Accept call waiting
Reject call waiting
4.2.16 Forwarding calls with and without notification
Forwarding calls internally without notification
You can forward calls if you dial the number of the internal subscriber and replace the receiver. This person is called
and receives the call on lifting the receiver.
Forwarding calls with notification
You want to forward and internal or external call to another internal subscriber, but you want to speak to this person
first.
18
Dial the code.
You hear the positive acknowledge tone.
Replace the receiver.
You are making a call.
A second party calls you. You hear the call waiting tone.
Dial the code.
You are connected to the subscriber whose call is waiting. Your first call is put on hold
(see Enquiry). For further information on this procedure, see also Brokering or Three-
Party Conference.
You are making a call. You hear the call waiting tone.
Replace the receiver. The first call is ended.
Your telephone rings.
When you lift the receiver, you are connected to the call waiting extension.
You are making a call. A second party calls you. You hear the call waiting tone.
Dial the key to refuse the call waiting. The caller can be switched to the queue, or the
call is released and the caller then hears the busy tone.
You are making an external call.
Press the R key. You hear the internal dialling tone.
Dial the internal subscriber.
You hear the ringing tone. Your correspondent is being called.
If you hear the engaged tone, press the R button again to return to the received call.
Replace the receiver. Your correspondent is being called. The person whose number you
dialled lifts the receiver and takes the external call. If the person whose number you di-
alled does not lift the receiver, the call returns to your telephone after the programmed
time.
Teldat GmbH
hybird 300 / hybird 600