General Technical Specifications - Interacoustics AD629 Gebrauchsanweisung

AD629 Instructions for Use - US

5 General technical specifications

AD629 technical specification
Safety Standards
EMC Standard
Audiometer Standards
Calibration
Air Conduction
Bone Conduction
Free Field
High Frequency
Effective masking
Transducers
Patient Response switch
Patient communication
Monitor
Special tests/test battery
Stimuli
IEC 60601-1, ES60601-1, CAN/CSA-C22.2 No.60601-1
Class I, Applied parts type B, Continuous operation
IEC 60601-1-2:2001 + A1:2004
Tone Audiometer: IEC 60645 -1, ANSI S3.6 -2010, Type 2, HF IEC 60645-4.
Speech Audiometer: IEC 60645-2/ANSI S3.6 type B or B-E.
Auto threshold tests: ISO 8253-1
Calibration information and instructions is located in the AD629 Service manual
DD45:
TDH39:
HDA300:
HDA280
E.A.R Tone 3A/5A:
IP 30:
CIR 33
B71:
Placement: Mastoid
ISO 389-7 2005, ANSI S3.6-2010
ISO 389-5 2004, ANSI S3.6-2010
ISO 389-4 1994, ANSI S3.6-2010
DD45
TDH39
HDA300
HDA280
DD450
B71 Bone
E.A.R Tone 3A/5A:
IP30
CIR 33
One hand held push button.
Talk Forward (TF) and Talk Back (TB).
Output through built-in speaker or through external earphone or speaker.
SISI. ABLB. Stenger. Stenger Speech. Langenbeck (tone in noise). Békésy Test, Weber.
2 channel speech, 2 channels Master Hearing Aid, Auto threshold.
Auto threshold tests:
Available time for patient to respond:
Increment of hearing level:
Auto threshold test (Békésy):
Mode of operation:
Rate of level change:
Smallest increment of level:
PTB/DTU report 2009
ISO 389-1 1998, ANSI S3.6-2010
PTB report PTB 1.61 – 4064893/13
PTB report 2004
ISO 389-2 1994, ANSI S3.6-2010
ISO 389-2 1994, ANSI S3.6-2010 DES-2361
ISO 389-2
ISO 389-3 1994, ANSI S3.6-2010
Headband Static Force 4.5N ±0.5N
Headband Static Force 4.5N ±0.5N
Headband Static Force 4.5N ±0.5N
Headband Static Force 5N ±0.5N
Headband Static Force 10N ±0.5N
Headband Static Force 5.4N ±0.5N
Same as tone presentation
5dB.
Békésy
2.5 dB/s ±20%
0.5 dB
Page 43