Setting Up The System - Denon AVR-2803 Bedienungsanleitung

Remote control unit
• For details on the functions of these parts, refer to the pages given in parentheses ( ).
LED (indicator)..............................(20)
ZONE 2 buttons ...........................(26)
Mode selector
buttons ............................(18~22, 26)
Input source selector
buttons ....(18, 19, 23, 26, 30, 35~37)
MODE SELECT button ................(18)
System buttons ...............(18, 19, 21)
SYSTEM SETUP/SETUP
button ..........................(9, 10, 17, 19)
Cursor buttons ...............................(9)
ON SCREEN/DISPLAY button ..(19, 25)
TEST TONE button ......................(27)
SYSTEM CALL buttons................(20)
USE/LEARN button................(20, 21)
NOTE:
• The shaded button
Remote control signal
transmitter ...................................(17)
Power buttons .......................(18~22)
ZONE 1/MAIN buttons.................(26)
Tuner system/System
buttons ................(18, 19, 26, 35~37)
Surround buttons
............................(23, 24, 28~30, 32)
Master volume control
buttons...................................(23, 26)
MUTING button ...........................(25)
SURROUND PARAMETER
button ..................(19, 28~30, 32, 33)
CH SELECT/ENTER button
.....................................(9, 19. 27, 28)
RDS/RETURN button.(18, 19, 36~38)
FRONT SPEAKER button.............(22)
SURROUND BACK button...........(30)
INPUT MODE selector
buttons...................................(23, 24)
does not function with the AVR-
2803. (Nothing happens when they are pressed.)
7

SETTING UP THE SYSTEM

• Once all connections with other AV components have been completed as described in "CONNECTIONS"
(see pages 4 to 8), make the various settings described below on the monitor screen using the AVR-2803's
on-screen display function.
These settings are required to set up the listening room's AV system centered around the AVR-2803.
• Check that the remote control unit is set to AMP mode (TAPE, CDR/MD or CD).
• The system settings can be reset to the default (factory shipment) settings by initialization of the
microprocessor (see page 38).
• Use the following buttons to set up the system:
• System setup items and default values (set upon shipment from the factory)
System setup
Input the combination of speakers in your
system and their corresponding sizes (Small for
Speaker regular speakers, Large for full-size, full-range) to
Configuration automatically set the composition of the signals
output from the speakers and the frequency
response.
q
Set the frequency (Hz) below which the bass sound
Crossover
of the various speakers is to be output from the
Frequency
subwoofer.
Subwoofer This selects the subwoofer speaker for playing
mode deep bass signals.
This parameter is for optimizing the timing with
which the audio signals are produced from the
w
Delay Time
speakers and subwoofer according to the listening
position.
This adjusts the volume of the signals output from
Channel
e
the speakers and subwoofer for the different
Level
channels in order to obtain optimum effects.
Input
source
Digital In This assigns the digital input jacks for the
r
Assignment different input sources.
Digital
Inputs
Video In This assigns the color difference (component)
t
Assignment video input jacks for the different input sources.
Dolby Digital Turn the audio compression on or off when down-
y
Setup mixing Dolby Digital signals.
Set this to switch the surround back
Power AMP
channel's power amplifier for use
Assignment
Zone2 for zone 2.
u
Control
Zone2 vol. This sets the output level for the
Level zone 2 output jacks.
SYSTEM SETUP button
Press this to display the system setup menu.
CURSOR buttons
0 and 1: Use these to move the cursors (0 and 1) to
the left and right on the screen.
• and ª: Use these to move the cursors (• and ª) to
the up and down on the screen.
ENTER button
Press this to switch the display.
Also use this button to complete the setting.
Default settings
Surround Back
Front Sp. Center Sp. Sub Woofer Surround Sp.
Large Small Yes Small Small / 2spkrs
80 Hz
LFE
Front L & R Center Sub Woofer Surround L & R
3.6 m (12 ft) 3.6 m (12 ft) 3.6 m (12 ft) 3.0 m (10 ft)
Surround Surround Surround Surround
Front L Front R Center
L R Back L Back R
0 dB 0 dB 0 dB 0 dB 0 dB 0 dB 0 dB
CD DVD VDP TV DBS V. AUX VCR-1 VCR-2
COAX1 COAX2 OPT1 OPT2 OPT3 OFF OFF OFF
DVD VDP TV DBS VCR-1 VCR-2 V. AUX
VIDEO1 NONE NONE VIDEO2 NONE NONE NONE
OFF
Surround Back
Variable
ENGLISH
Sp.
SBL & SBR
3.0 m (10 ft)
Subwoofer
0 dB
TAPE
OPT4
—
—
9