Surround - Denon AVR-2803 Bedienungsanleitung

ENGLISH
Dolby Digital mode (only with digital input) and DTS Surround mode
(only with digital input)
1 3
1 3 2 4,5 2,6
1
Select the input source.
Playback with digital input
q Select an input source set to digital
(COAXIAL/OPTICAL) (see page 13).
FUNCTION
(Main unit) (Remote control unit)
w Set the input mode to "AUTO" or "DTS".
(Main unit) (Remote control unit)
2
Select the Dolby/DTS Surround mode.
(Remote control unit)
3
Play a program source with the
• The Dolby Digital indicator lights when
DIGITAL
playing Dolby Digital sources.
Light
• The DTS indicator lights when playing
DTS sources.
Light
The SIGNAL DETECT indicator lights
•
SIGNAL
DETECT
when playing 6.1-channel surround
Light
sources containing the identification
signal.
When the SIGNAL DETECT indicator is lit, we
recommend turning the surround back channel
using the SURROUND BACK button on the
remote control unit and main unit during playback.
To use DTS 96/24 sources with the optimum
system, we recommend turning the surround
back channel off.
30
1
2
1
When performing this operation from the main unit's
panel, press the SURROUND MODE button, then turn
the SELECT knob and select Dolby Pro logic II or DTS
NEO:6.
SELECT
(Main unit)
, mark.
Operate the SURROUND BACK button to
switch Surround Back CH ON/OFF.
(Main unit) (Remote control unit)

SURROUND

BACK CH
• Lights when the Surround Back
OUTPUT
Light
CH is on .
4
Display the surround parameter menu.
(Main unit)
NOTE: The display on the screen differs depending on whether you are performing the operation from
the main unit or the remote control unit.
5
Select the various parameters.
(Main unit)
Dialogue Normalization
2
4
The dialogue normalization function is activated automatically when playing Dolby Digital program sources.
5, 6
Dialogue normalization is a basic function of Dolby Digital which automatically normalizes the dialog level
(standard level) of the signals which are recorded at different levels for different program sources, such as DVD,
3 DTV and other future formats that will use Dolby Digital.
These contents can be verified with the STATUS button.
OFFSET - 4dB
NOTE: When "Default" is selected and the 0 cursor button is pressed, "CINEMA EQ." and "D.COMP." are
automatically turned off, "LFE" is reset, and the tone is set to the default value.
(Remote control unit)
6
Adjust the parameter settings.
SELECT
(Main unit)
(Remote control unit)
The number indicates the normalization level when the currently playing
program is normalized to the standard level.
(Remote control unit)