11. Care And Maintenance - uher SG 561 Royal Bedienungsanleitung

Since all important bearing points are equipped with self-lubricating
sintered metal bearing brushes, the SG 561 will not require oiling dur-
ing its entire Service life. Care and maintenance in the main are restricted
to checking and cleaning at regulär intervals. Our UHER Service agents
should be consulted for this task. The cleaning of tape-touching parts
(that from time to time may be needed, äs may be recognized by a loss
in playback response, especially of high frequencies) can easily be per-
formed by the user himself. For this purpose, first pull the cover cap in
front of the tape head mount up and off. The magnetic tape heads (A),
(B), (C) and (D), the tape guides (E), (F), (G), (H), äs well äs the tape
guide roller (l), pressure roiler (K) and the capstan (L) will then be easily
accessible and may be cleaned with the cleaning fluids contained in
42
A B F l
UHER Special Cleaning Kit Z 172 to remove deposits of dust and tape
coating.
The SG 561 is a highly developed precision machine; its trouble-free
Operation depends upon the exact co-functioning of its mechanical and
electrical components. In designing these important parts, attention
was given to obtaining the highest degree of operational reliability.
Should malfunctions appear at any time, we recommend Consulting an
experienced audio technician, for experience has shown that he will
best be able to spot and correct the difficulty (that will usually be of a
minor nature). We warn strongly against any tampering by non-tech-
nicians äs it generally results only in still greater damage.
D G L K
13
Fig.