Herunterladen Inhalt Inhalt Diese Seite drucken

Sound-With-Sound ("Multiplay") - uher SG 561 Royal Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

The sound-on-sound technique is particularly useful in making home
the SG 561 make it most easy to produce trick recordings.
2. Set MONITOR Switch in SOURCE position. Both knobs of the
the way to the left.
3. Connect microphone to Q socket and press the MICRO Switch © .
4.
Connect headphones, like UHER Midget Magnetic Earphones W 214
or UHER Stereo Headphones W 674 or W 774, to the socket p l
(the plugs of the Stereo headphones should be plugged together
before making the connection.
5. As previously described, make a first recording from the microphone.
Adjust the record level with the upper knob of the MICRO/RADIO
control @ . The left Level Meter © will go into action.
6.
Rewind tape to beginning of first recording.
7.
Turn Mode Selector © to SYN.PLAY 2 position.
8.
Put on headphones.
9.
Press Record Button © and Start recording. While listening to the
playback of the first recording through the headphones (playback
volume may be adjusted with the upper knob of VOLUME Con-
Use the upper knob of the MICRO/RADIO Control @ to set the
record level which, in turn, will be indicated by the right Level
Fig. 10
Meter ©.
10. On completing the recording, rewind the tape and disconnect the
headphones.
® to STEREO position, set the MONITOR Switch in TAPE position
and Start tape transport.

7.4 Sound-with-Sound ("Multiplay")

The sound-with-sound technique makes it possible to produce multiple
mono trick recordings by transferring one recorded track to another
several times may result in a one-man sextet, for instance. For sound-
with-sound recording the two tracks needed (in dual-track Operation:
track 1 and 2; in quarter-track Operation: tracks 1 and 3 or 2 and 4)
the distribution of tracks in this type of Operation. The well-designed
construction of the SG 561 makes this type of recording simple and
37

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis