Programming The Transmitter - Siemens sitrans f Handbuch

Commissioning

4.2 Programming the Transmitter

Typical Installation Menu Screen Example
①
②
③
Figure 4-1
4.2 Programming the Transmitter
Note
Before creating a site select English or metric units from the Meter Facilities menu.
Select a Meter Type
1. After power-up, press <ENTER> key to access the top level of the Installation Menu.
2. [Single Channel] meter type appears.
3. Press <Right Arrow> key twice to select [Channel Setup] menu.
22
2-Line LCD Display
Right Arrow Key
Left Arrow Key
5-Key Touch Keypad
Note
IMPORTANT: Colon appears when menu item is selected for entry.
④
ENTER Key
⑤
Down Arrow Key
⑥
Up Arrow Key
Operating Instructions, 07/2010, A5E03086489-01
FST020 IP65 NEMA 4X