Wall Mounting - Siemens sitrans f Handbuch

Installing/Mounting
2.2 Mounting the Transmitter

Wall Mounting

The transmitter can be mounted on any wall surface including wood, metal or concrete. Use
the appropriate bolts and screws as needed for your mounting application and adhere to local
codes.
● Recommended mounting: directly to wall or to electrical cabinet back panel.
● If alternate mounting surface is used it MUST support four times the weight of the unit.
Mounting the Enclosure
1. Loosen the Enclosure cover screws and open the cover to reveal the mounting screw holes.
2. Mark and drill four holes in the mounting surface for the four #8 screws (supplied).
3. Fasten with a long flat-blade screwdriver.
8
①
Mounting holes
②
Enclosure cover screws
Figure 2-1 Wall Mounting
FST020 IP65 NEMA 4X
Operating Instructions, 07/2010, A5E03086489-01