Siemens sitrans f Handbuch Seite 26

Commissioning
4.2 Programming the Transmitter
4. Press <Right Arrow> key. Press <Up/Down Arrow> keys to scroll to select desired Pipe
5. Press <ENTER> key to save Pipe Size selection.
Select Liquid Class
1. Press <Left Arrow> key to select [Pipe Data] and then press <Down Arrow> key to select
2. Press <Right Arrow> key to select [Liquid Class].
3. Press <Right Arrow> key again to select [Select Liquid]. Press <Right Arrow> key again.
4. Press <Up/Down Arrow> keys to scroll to desired liquid.
5. Press <ENTER> key to save selection.
Select Pipe Configuration
1. Press <Left Arrow> key and then <Down Arrow> key to select [Pipe Config].
2. Press <Right Arrow> key.
24
Size.
Note
Pre-programmed Pipe Size and relevant pipe parameters will appear in menu cells. To
enter dimensions manually if pre-programmed dimensions do not match application, refer
to Operating Instructions manual for details.
①
Colon must appear first before Pipe Class can be selected.
[Application Data].
①
Colon appears.
②
Select new liquid from option list.
FST020 IP65 NEMA 4X
Operating Instructions, 07/2010, A5E03086489-01