Control Elements And Interfaces; Fitting The Screw-Type Meter - Siemens WFx6 Bedienungs- Und Montageanleitung

Control elements and interfaces

(1) The display is always off as standard (sleep mode).
(7) Attachment holes for external optical modules and external cables
(8) User protection and slots for external cable connections

Fitting the screw-type meter

ismantle the ushing tube or e isting meter
•
• Remove old seals
• Dismantle temperature sensor if appropriate
• Remove threaded protective caps
Always use new seals
when installing a new meter!
• Tighten scre tting ith ne seal to ma
45 Nm tightening torque
Siemens Building Technologies
Press the < H > or < V > key
brie to open the ast readout
display loop.
Press the < H > or < V > key
longer than 3 seconds to open
the level operating scheme.
(2) <H> key (horizontal)
(3) <V> key (vertical)
(4) IrDA interface
(5) Interface cover
(6) Module interface
A6V10816676_----_d 95 EN