Figure 3-3 5-Key Touch Keypad; Programming The Transmitter - Siemens SITRANS F Quick Start Betriebsanleitung

Typical Installation Menu Screen Example
①
②
③
Figure 3-3
3.2

Programming the Transmitter

Note
Before creating a site select English or metric units from the Meter Facilities menu.
Select a Meter Type
1. After power-up, press <ENTER> key to access the top level of the Installation Menu.
2. [Single Channel] meter type appears.
3. Press <Right Arrow> key twice to select [Channel Setup] menu.
FST020 IP65 NEMA 4X Quick Start
Operating Instructions, 03/2012, A5E03086489-05
2-Line LCD Display
Right Arrow Key
Left Arrow Key
5-Key Touch Keypad
Note
IMPORTANT: Colon appears when menu item is selected for entry.
3.2 Programming the Transmitter
④
ENTER Key
⑤
Down Arrow Key
⑥
Up Arrow Key
Connecting
17