Wall Installation; Attach The User Protection - Siemens WFx6 Bedienungs- Und Montageanleitung

Wall installation

Variants with removable calculator unit can be installed up to max. 40 cm away
from the o metering element using the optional wall bracket HMRIK001 001.

Attach the user protection

The meter is delivered with two twister seals which can be used to seal the
temperature sensor and the measuring tube scre tting
To seal the unit proceed as follows:
(1) Thread the wire of the seal through the seal bore holes of the union nut
on the inlet, on the EAT and on the o metering element or sensor screw
tting and immersion sleeve
(2) Insert the wire through the opening in the seal body and pull it tight.
old the seal closure over and click rml to press it completel ush to the
seal housing.
(4) Cut off excess seal wire.
Siemens Building Technologies
(1) Attach the spacer (a) and wall bracket
(b) in the required position using the
enclosed material. Align the wall bracket
in such a way that the groove (b1) is
pointing downwards.
(2) Fit the cover (c) in such a way that
the marking "TOP2" can be read
horizontally, and click it into the wall
bracket.
(3) Take the calculator unit off the o metering
element, unwind the calculator unit
(4) Firmly latch the calculator unit into the
wall bracket.
A6V10816676_----_d 99 EN