Personal Protection Equipment; Use In Explosive Areas - SATA SATAjet 100 B F RP/HVLP Betriebsanleitung

<< Operating Instructions SATAjet 100 B F (RP/HVLP), B P >>

6.3. Personal protection equipment

• When using, cleaning or maintaining the spray gun, always wear
approved breathing and eye protection equipment as well as suitable
protective gloves, overalls and safety boots!
• When using the paint spray gun, noise levels of 85 dB(A) may be
exceeded. Wear suitable hearing protection!
The painter is not exposed to vibrations while using the spray gun. Repul-
sive forces are minimal.

6.4. Use in explosive areas

Ex-sign Equipment cat-
egory
6.4.1 General
The paint spray gun is approved for the use / storage in explosive areas
of Ex-Zone 1 and 2.
• The following applications and operations lead to the loss
of the explosion protection and are, therefore, prohibited:
• Use of the paint spray gun in explosive areas belonging to ex-zone 0!
• Do not use solvents and cleaning agents based on halogenised
hydrocarbons! Chemical reaction which may occur when using these
substances may be explosive!
Warning!
Device category
Warning! Risk of explosion!
Gas category Temperature level
EN
VII.5