Storage; Troubleshooting - Cleanmaxx Z 07338 Gebrauchsanleitung

Storage

• You can push the telescoping tube together as far as possible and hook the fl oor
nozzle into the bracket on the back of the device for convenient storage.
• Store the vacuum cleaner in a dry, cool indoor room that is not accessible for children
and animals.

Troubleshooting

If your device no longer functions properly, exhibits damages or requires a spare part,
please contact our customer service centre. For your own safety, do not perform any repairs
yourself. The following table gives you tips on how to resolve minor problems yourself.
Problem
The vacuum
cleaner has no
suction power.
The suction power
is weak.
The suction nozzles
cannot be attached
properly on the
telescopic tube.
The device
emits dust when
vacuuming.
The power cord
cannot be wound up
completely.
27
2. You can now remove hair, dust etc. from the brush.
3. After cleaning, close the cover. It has to click audibly into
place.
Potential cause/solution/tips
• Is the mains plug not correctly connected with the socket?
Correct the position of the mains plug.
• Is the socket defective? Try another socket.
• Check the fuse for your mains connection.
• Are the fi lters plugged? Clean them.
• Is the auxiliary air valve on the handle open? Close it.
• Is the dust bin too full? Empty the bin.
• Are the fi lters very dirty? Clean them.
• Is the nozzle, telescoping tube or suction hose plugged?
Turn the device off, pull the mains plug out of the socket
and remove the obstruction (also see chapter "Assembly").
• Have you used the animal hair nozzle? When removing the
animal hair nozzle it can happen that the adapter sleeve
remains in place on the telescopic tube. Please note that the
other suction nozzles can only be applied to the telescopic tube
when the adapter sleeve has been removed from the tube!
• Has the dust bin not been closed properly and/or is it not
(properly) inserted in the device? Correct this.
• The cord has not been properly wound up in the device. Pull
it out somewhat and then push the button
the cord winder again.
EN
for engaging