Faema BARCODE Gebrauch Und Installation Seite 64

7) Eliminate any remaining washing solution in the container
and add about 0.7 liters of cold water, leaving the milk
intake tube in the container;
8) Keep the milk circuit washing key (28)
the "WASHING IN PROGRESS" message appears again
on the display:
wednesday
WASHING IN PROGRESS
The washing cycle has ended when this message appears
on the display:
9) Remove the milk intake tube from the container and
reposition the tube back into the milk container.
10) Press any dispensing key to return to normal work
operations.
Do not remove the container during the washing
procedure: otherwise, the washing cycle must
be repeated.
Selection block - This occurs after 60' of functioning from the
preset time if the washing cycle has not taken place, with the
"Block milk circuit" function enabled (YES) by the installer.
For machines with soluble product dispensing, please consult
the paragraph "CLEANING THE SOLUBLES CIRCUIT".
Downloaded from www.Manualslib.com
10 March 2010
15:15:04
00:57
WASH COMPLETED
MACHINE READY
PRESS ANY KEY
manuals search engine
7
pressed until
8
9
10
62
28